Search This Supplers Products:Auto PartsHonda Car PartsToyota Car PartsBenz Car PartsBmw Car PartsOEM Car Parts
The importance of daytime running lights.
sourceAutopartsvv.com
publisherJacky
time2013/10/15
- Installation Guide
Daytime running lights is a new signal lamps, mainly used in the sightline poorer environment situations. Daytime running lights main role is used in the road traffic in the event of fog, rain weather
Installation Guide
Daytime running lights is a new signal lamps, mainly used in the sightline poorer environment situations. Daytime running lights main role is used in the road traffic in the event of fog, rain weather, manufacturing lights let other users of the road as soon as possible to find yourself, if it is generally headlights, for light mechanical energy is converted by the relationship, generally large halogen lamp power is 70W, while the daytime running lights only 13.5W total power consumption, energy saving is to save money, the product flux is 70-90LM, Color Fan range 6000K-6700K, even brighter than traditional halogen, power consumption is only 20% of halogen headlights. Complete luminaire pollution, no noise, no electronic interference, the use of advanced constant current control technology, light uniformity, light color full, lasting constant. As new products, welcomed by users.
Installed in the front section of the daytime running lights, is to make the vehicle more easily in the daytime driving lamps to be recognized. Its effect is not to make the driver to see the road, but to let people know there is a car coming. So this lamp is not lighting, but a semaphore. Of course, the installation of daytime running lights make the cars look cooler, more dazzling, but the maximum effect of daytime running lights is not that beautiful, but to provide a vehicle is identifiability. Abroad, open headlights can reduce 12.4% of vehicles accidents, but also can reduce the risk of death by 26.4% of the car accident. In short, daytime running lights purpose is to traffic safety.
Dedicated LED
1 Prepare a flathead screwdriver, a wrench.
(2) using a flathead screwdriver gently into the gap original car fog lamp, fog lamp demolition of the original car, keep good original car fog lamp.
3. The car-specific daytime running lights controller, power line through the original car fog lamp position and put a big hole.
4 Insert the card into the daytime running lights position of the original car fog lamp bayonet.
5 Open the front cover car, the controller can be installed in cold places, the controller has four lines, the red wire ACC, the black wire to the battery negative, positive yellow line, white line connected headlights. The role of the white line is when the headlights turned on when the daytime running light is turned off, if connected to the white line, daytime running lamp will remain lit when the car starts, personal preferences that is connected white lines.
6 Start the car, daytime running lights illuminate themselves, the installation was successful. [4]
Universal LED
Choose a suitable location in the front office (depending on the model) and try to avoid stagnant water temperature and easy place. Remove the universal LED daytime running lights installation instructions, according to the installation instructions in the car daytime running lights with a drill fixing holes open. After a good daytime running lights with screws in the car.
1 Select the installation location, LED daytime running lights should be installed at a temperature not higher than 80 degrees and not easy to place water.
2 line installation, note the wiring harness to interface with LED daytime running lights interface direction (refer to daytime driving instructions) and harness each color line safety connected to the car line position (reference line installation in step 2).
3 car battery voltage is between 10V ~ 30V. [4]
Precautions
1 Select the installation location, daytime running lights should be installed at a temperature not higher than 80 degrees and not easy to place water.
2 line installation, note the wiring harness to interface with the interface direction daytime running light (refer to the specification daytime running) and the lines of each color in the harness connected to the bus lines in the safety position (reference line installation in step 2) .
3 car battery voltage is between 10V ~ 30V. [4]
Frequently Asked Questions
1, daytime running lights can not be turned
Daytime running lights loading effect diagram
Daytime running lights loading effect diagram
Open the vehicle's ignition, the low beam light switch turned off, daytime running lights not working properly, you should check the following items:
1) Check the ignition switch power supply output voltage is normal (10V ~ 30V).
2) Check the wiring harness daytime running lights are installed correctly. (Black wire connected to the output terminal of the ignition switch, brown wire to the car battery cathode, gray wire connected to the light switch near the output end)
3) The gray line floating (not connected), re-open the car ignition switch, check the daytime running lights are lit. If lit, then the gray line connection errors, recheck gray cord is properly connected to the low beam light output.
4) above checks are correct, the black wire to the car battery positive, brown wire to the battery negative, gray line vacant, check whether it is normal to use daytime running lights. Daytime running lights can be lit, then re-check the installation line (reference line installation), daytime running lights point can not, either replace the wiring harness or daytime running lights.
2, daytime running lights lit
Ignition switch is not turned on, daytime running lights on the case should be examined on the following: Check the harness black wire is connected right (the black wire harness connected to the output terminal of the ignition switch).
3, open beam light switch, daytime running lights can not be closed
1) near light on and near the light does not light, daytime running lights can not be switched off. Use a multimeter to check the output beam light switch if there is 10 ~ 30V supply voltage output. There is voltage output and normal, then be re-wiring and security firm, there is no voltage output, should be checked near light switches and lights near the power supply circuit is normal.
2) near light is on and steady, daytime running lights can not be closed
Remove the gray line, the gray wire connected to the car battery positive view daytime running lights are turned off. Daytime running lights can be turned off, the gray cable is not connected securely reinstalled pick; daytime running lights can not be turned off, replace the daytime running lights harness.
3) Open the low beam switch, one of the daytime running lights can not be closed off during the day and can not replace the running lights, xenon open switch, check and replace the rear daytime running lights are shut down, you can not turn off, replace the wiring harness.
4) Open the low beam light switch, daytime running lights inside one of two or three LED lights can not be turned off to be replaced daytime running lights can not be turned off.
Daytime running lights is a new signal lamps, mainly used in the sightline poorer environment situations. Daytime running lights main role is used in the road traffic in the event of fog, rain weather, manufacturing lights let other users of the road as soon as possible to find yourself, if it is generally headlights, for light mechanical energy is converted by the relationship, generally large halogen lamp power is 70W, while the daytime running lights only 13.5W total power consumption, energy saving is to save money, the product flux is 70-90LM, Color Fan range 6000K-6700K, even brighter than traditional halogen, power consumption is only 20% of halogen headlights. Complete luminaire pollution, no noise, no electronic interference, the use of advanced constant current control technology, light uniformity, light color full, lasting constant. As new products, welcomed by users.
Installed in the front section of the daytime running lights, is to make the vehicle more easily in the daytime driving lamps to be recognized. Its effect is not to make the driver to see the road, but to let people know there is a car coming. So this lamp is not lighting, but a semaphore. Of course, the installation of daytime running lights make the cars look cooler, more dazzling, but the maximum effect of daytime running lights is not that beautiful, but to provide a vehicle is identifiability. Abroad, open headlights can reduce 12.4% of vehicles accidents, but also can reduce the risk of death by 26.4% of the car accident. In short, daytime running lights purpose is to traffic safety.
Dedicated LED
1 Prepare a flathead screwdriver, a wrench.
(2) using a flathead screwdriver gently into the gap original car fog lamp, fog lamp demolition of the original car, keep good original car fog lamp.
3. The car-specific daytime running lights controller, power line through the original car fog lamp position and put a big hole.
4 Insert the card into the daytime running lights position of the original car fog lamp bayonet.
5 Open the front cover car, the controller can be installed in cold places, the controller has four lines, the red wire ACC, the black wire to the battery negative, positive yellow line, white line connected headlights. The role of the white line is when the headlights turned on when the daytime running light is turned off, if connected to the white line, daytime running lamp will remain lit when the car starts, personal preferences that is connected white lines.
6 Start the car, daytime running lights illuminate themselves, the installation was successful. [4]
Universal LED
Choose a suitable location in the front office (depending on the model) and try to avoid stagnant water temperature and easy place. Remove the universal LED daytime running lights installation instructions, according to the installation instructions in the car daytime running lights with a drill fixing holes open. After a good daytime running lights with screws in the car.
1 Select the installation location, LED daytime running lights should be installed at a temperature not higher than 80 degrees and not easy to place water.
2 line installation, note the wiring harness to interface with LED daytime running lights interface direction (refer to daytime driving instructions) and harness each color line safety connected to the car line position (reference line installation in step 2).
3 car battery voltage is between 10V ~ 30V. [4]
Precautions
1 Select the installation location, daytime running lights should be installed at a temperature not higher than 80 degrees and not easy to place water.
2 line installation, note the wiring harness to interface with the interface direction daytime running light (refer to the specification daytime running) and the lines of each color in the harness connected to the bus lines in the safety position (reference line installation in step 2) .
3 car battery voltage is between 10V ~ 30V. [4]
Frequently Asked Questions
1, daytime running lights can not be turned
Daytime running lights loading effect diagram
Daytime running lights loading effect diagram
Open the vehicle's ignition, the low beam light switch turned off, daytime running lights not working properly, you should check the following items:
1) Check the ignition switch power supply output voltage is normal (10V ~ 30V).
2) Check the wiring harness daytime running lights are installed correctly. (Black wire connected to the output terminal of the ignition switch, brown wire to the car battery cathode, gray wire connected to the light switch near the output end)
3) The gray line floating (not connected), re-open the car ignition switch, check the daytime running lights are lit. If lit, then the gray line connection errors, recheck gray cord is properly connected to the low beam light output.
4) above checks are correct, the black wire to the car battery positive, brown wire to the battery negative, gray line vacant, check whether it is normal to use daytime running lights. Daytime running lights can be lit, then re-check the installation line (reference line installation), daytime running lights point can not, either replace the wiring harness or daytime running lights.
2, daytime running lights lit
Ignition switch is not turned on, daytime running lights on the case should be examined on the following: Check the harness black wire is connected right (the black wire harness connected to the output terminal of the ignition switch).
3, open beam light switch, daytime running lights can not be closed
1) near light on and near the light does not light, daytime running lights can not be switched off. Use a multimeter to check the output beam light switch if there is 10 ~ 30V supply voltage output. There is voltage output and normal, then be re-wiring and security firm, there is no voltage output, should be checked near light switches and lights near the power supply circuit is normal.
2) near light is on and steady, daytime running lights can not be closed
Remove the gray line, the gray wire connected to the car battery positive view daytime running lights are turned off. Daytime running lights can be turned off, the gray cable is not connected securely reinstalled pick; daytime running lights can not be turned off, replace the daytime running lights harness.
3) Open the low beam switch, one of the daytime running lights can not be closed off during the day and can not replace the running lights, xenon open switch, check and replace the rear daytime running lights are shut down, you can not turn off, replace the wiring harness.
4) Open the low beam light switch, daytime running lights inside one of two or three LED lights can not be turned off to be replaced daytime running lights can not be turned off.